Parameters |
Contact Plating |
Lead, Tin |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Subcategory |
Comparator |
Max Power Dissipation |
65mW |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
AD8561 |
Pin Count |
8 |
Output Type |
CMOS, Complementary, TTL |
Number of Elements |
1 |
Power Supplies |
3/5/+-5V |
Nominal Supply Current |
6mA |
Power Dissipation |
65mW |
Max Supply Current |
6mA |
Propagation Delay |
9.8 ns |
Quiescent Current |
5.5mA |
Response Time |
7 ns |
Common Mode Rejection Ratio |
85 dB |
Voltage - Supply, Single/Dual (±) |
3V~10V ±1.5V~5V |
Output Current per Channel |
3.2mA |
Input Offset Voltage (Vos) |
3mV |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Voltage Gain |
69.54dB |
Power Supply Rejection Ratio (PSRR) |
65dB |
Supply Voltage Limit-Max |
7V |
Max Input Current |
6μA |
Dual Supply Voltage |
3V |
Input Bias Current |
3μA |
Neg Supply Voltage-Max (Vsup) |
-7V |
Current - Quiescent (Max) |
6mA 3.3mA 5.5mA |
Voltage - Input Offset (Max) |
7mV @ 5V |
Current - Input Bias (Max) |
6μA @ 5V |
CMRR, PSRR (Typ) |
85dB CMRR, 65dB PSRR |
Length |
4.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
AD8561AR Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .There is a CMOS, Complementary, TTL output type for this comparator.The part will be shipped by Tube .The comparator has a total of 8 terminals.Electronic comparator is a component of the Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.Speaking of types, this is a typical General Purpose comparator.Currently, it consists of only 1 elements.Electronic comparator includes 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.8 pins are present on the comparator.You can find more pin-to-pin solutions for your special requirements by searching AD8561 .A quiescent current of 5.5mA is displayed by this comparator.Normally, the nominal supply current should be 6mA when using the device.If the current supply exceeds 6mA , the comparator could malfunction.The device can be run with 3/5/+-5V power supplies.Electronic comparator is possible to input a maximum of 6μA current into the device.According to the voltage formula, the part has a voltage gain of 69.54dB .
AD8561AR Features
CMOS, Complementary, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 5.5mA
Voltage Gain: 69.54dB
AD8561AR Applications
There are a lot of Analog Devices Inc. AD8561AR linear comparators applications.
- Ultra-Low Power Systems
- Lithium ion battery monitoring
- Multivibrators and High-Voltage Digital Logic Gates
- Portable and Battery-Powered Systems
- Infotainment and Clusters
- General Purpose Low Voltage Applications
- High-Speed Differential Line Receiver
- Set Top Boxes
- Notebooks and PDAs
- Alarm and Monitoring Circuits