AD8561AR-REEL7
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 65mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8561 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Complementary, TTL |
| Number of Elements | 1 |
| Power Supplies | 3/5/+-5V |
| Nominal Supply Current | 5.5mA |
| Power Dissipation | 65mW |
| Propagation Delay | 9.8 ns |
| Quiescent Current | 5.5mA |
| Response Time | 7 ns |
| Common Mode Rejection Ratio | 85 dB |
| Voltage - Supply, Single/Dual (±) | 3V~10V ±1.5V~5V |
| Output Current per Channel | 3.2mA |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 69.54dB |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 6μA |
| Dual Supply Voltage | 3V |
| Input Bias Current | 6μA |
| Neg Supply Voltage-Max (Vsup) | -7V |
| Current - Quiescent (Max) | 6mA 3.3mA 5.5mA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 6μA @ 5V |
| CMRR, PSRR (Typ) | 85dB CMRR, 65dB PSRR |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD8561AR-REEL7 Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.Output type of this comparator is CMOS, Complementary, TTL .Electronic comparator is shipped by Tape & Reel (TR) .There are8 terminals on the comparator.The electrical component in this case belongs to the Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.A comparator of this type is typically of type General Purpose .This is a 1 element comparator.The device includes 8 pins.The recommended mounting type is Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .The comparator consists of 8 pins.Alternatively, you may search for AD8561 to find more pin-to-pin solutions for your specific needs.The comparator presents a quiescent current of 5.5mA volts.Normally, the nominal supply current should be 5.5mA .In order to run the device, there are only 3/5/+-5V power supplies required.A maximum current of 6μA can be supplied to the device.The voltage formula shows that the part has a voltage gain of 69.54dB .
AD8561AR-REEL7 Features
CMOS, Complementary, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 5.5mA
Voltage Gain: 69.54dB
AD8561AR-REEL7 Applications
There are a lot of Analog Devices Inc. AD8561AR-REEL7 linear comparators applications.
- Industrial
- Window Comparators, Multivibrators
- Wireless Base Stations
- Alarm and Monitoring Circuits
- Consumer Medical Electronics
- Mobile Communications
- Notebooks and PDAs
- Factory automation & control
- System control and monitoring
- General Purpose Low Voltage Applications
