AD8561ARZ
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8561 |
| Pin Count | 8 |
| Output Type | CMOS, Complementary, TTL |
| Operating Supply Voltage | 9V |
| Number of Elements | 1 |
| Power Supplies | 3/5/+-5V |
| Nominal Supply Current | 6mA |
| Power Dissipation | 65mW |
| Max Supply Current | 6mA |
| Propagation Delay | 9.8 ns |
| Quiescent Current | 5.5mA |
| Turn On Delay Time | 9.8 ns |
| Response Time | 7 ns |
| Common Mode Rejection Ratio | 85 dB |
| Voltage - Supply, Single/Dual (±) | 3V~10V ±1.5V~5V |
| Output Current per Channel | 3.2mA |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 69.54dB |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Supply Voltage Limit-Max | 7V |
| Dual Supply Voltage | 3V |
| Input Bias Current | 6μA |
| Current - Quiescent (Max) | 6mA 3.3mA 5.5mA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 6μA @ 5V |
| CMRR, PSRR (Typ) | 85dB CMRR, 65dB PSRR |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 65mW |
| Technology | BIPOLAR |
AD8561ARZ Overview
A convenient packaging is provided in the form of 8-SOIC (0.154, 3.90mm Width) .Output type CMOS, Complementary, TTL is used for this comparator.This package has been designed with Tube .You can find 8 terminals of the comparator.Other Comparator like the device play a important role in the industry.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.Speaking of types, this is a typical General Purpose comparator.Electronic comparator consists of 1 elements in total.A total of 8 pins are included.Electronic comparator is recommended to mount using type Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.The comparator is equipped with 8 pins.Try search AD8561 to get more pin-to-pin solutions for your special needs.The comparator presents a quiescent current of 5.5mA volts.Electronic comparator is recommended that the nominal supply current of the device be 6mA .Current supply exceeding 6mA could cause disfunction of the compartator.A power supply of 3/5/+-5V is sufficient for the operation of the device.A voltage gain of 69.54dB can be determined from the voltage formula for the part.In order to operate normally, a supply voltage of 0 is required.
AD8561ARZ Features
CMOS, Complementary, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 5.5mA
Voltage Gain: 69.54dB
AD8561ARZ Applications
There are a lot of Analog Devices Inc. AD8561ARZ linear comparators applications.
- Mobile Phones and Tablets
- Wide Range VCO; MOS Clock Timers
- General Purpose Low Voltage Applications
- Point of load regulators
- Window Comparators
- Pulse, Squarewave, and Time Delay Generators
- Consumer Medical Electronics
- Threshold Detectors
- System control and monitoring
- Infotainment and Clusters
