Parameters |
Contact Plating |
Lead, Tin |
Mounting Type |
Through Hole |
Package / Case |
16-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Subcategory |
Comparators |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
NOT APPLICABLE |
Number of Functions |
4 |
Supply Voltage |
5V |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
NOT APPLICABLE |
Base Part Number |
AD8564 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Output Type |
CMOS, TTL |
Operating Supply Voltage |
5V |
Number of Elements |
4 |
Nominal Supply Current |
7mA |
Power Dissipation |
150mW |
Propagation Delay |
9.8 ns |
Quiescent Current |
7mA |
Response Time |
8 ns |
Common Mode Rejection Ratio |
85 dB |
Input Offset Voltage (Vos) |
7mV |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Voltage Gain |
69.54dB |
Average Bias Current-Max (IIB) |
9μA |
Power Supply Rejection Ratio (PSRR) |
80dB |
Max Dual Supply Voltage |
17V |
Dual Supply Voltage |
5V |
Input Bias Current |
4μA |
Current - Quiescent (Max) |
14mA 14mA 7mA |
Voltage - Input Offset (Max) |
7mV @ 5V |
Current - Input Bias (Max) |
4μA @ 5V |
CMRR, PSRR (Typ) |
85dB CMRR, 80dB PSRR |
Height Seated (Max) |
5.33mm |
Length |
20.07mm |
Width |
7.62mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
AD8564AN Overview
A convenient transport package is provided in 16-DIP (0.300, 7.62mm) .Output type CMOS, TTL is used for this comparator.We ship the part through Tube .You can find 16 terminals of the comparator.The electrical component here belongs to the Comparators family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .When it comes to types, this comparator is a typical General Purpose .This element consists of 4 elements in total.The device is equipped with 16 pins.The recommended mounting method is Through Hole .As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.16 pins are available on the comparator.Search AD8564 to find more pin-to-pin solutions.A quiescent current of 7mA is observed in this comparator.Normal use of the device should require a nominal supply current of 7mA .According to the voltage formula, the part has a voltage gain of 69.54dB .The normal operation of the system requires 5V operating voltage.
AD8564AN Features
CMOS, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 7mA
Voltage Gain: 69.54dB
AD8564AN Applications
There are a lot of Analog Devices Inc. AD8564AN linear comparators applications.
- Mobile Communications
- Alarm and Monitoring Circuits
- DC/DC and AC/DC power supplies
- Handheld Instruments
- Battery-Powered Electronics
- Notebooks and PDAs
- Simple Analog-to-Digital Converters (ADCs)
- Body Control Modules
- General Purpose Low Voltage Applications
- Consumer Medical Electronics