Parameters |
Mounting Type |
Through Hole |
Package / Case |
16-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparators |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
NOT APPLICABLE |
Number of Functions |
4 |
Supply Voltage |
5V |
Reach Compliance Code |
unknown |
Time@Peak Reflow Temperature-Max (s) |
NOT APPLICABLE |
Base Part Number |
AD8564 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Output Type |
CMOS, TTL |
Operating Supply Voltage |
5V |
Number of Elements |
4 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Nominal Supply Current |
10.8mA |
Power Dissipation |
150mW |
Propagation Delay |
9.8 ns |
Quiescent Current |
7mA |
Response Time |
8 ns |
Common Mode Rejection Ratio |
85 dB |
Input Offset Voltage (Vos) |
7mV |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Voltage Gain |
69.54dB |
Average Bias Current-Max (IIB) |
9μA |
Power Supply Rejection Ratio (PSRR) |
80dB |
Max Dual Supply Voltage |
17V |
Dual Supply Voltage |
5V |
Input Bias Current |
4μA |
Current - Quiescent (Max) |
14mA 14mA 7mA |
Voltage - Input Offset (Max) |
7mV @ 5V |
Current - Input Bias (Max) |
4μA @ 5V |
CMRR, PSRR (Typ) |
85dB CMRR, 80dB PSRR |
Height |
3.3mm |
Length |
20.07mm |
Width |
6.35mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
AD8564ANZ Overview
The product is packaged in 16-DIP (0.300, 7.62mm) to facilitate transportation.A comparator with a CMOS, TTL output is used here.This package has been designed with Tube .16 terminals are found on the comparator.The electrical component in this case belongs to the Comparators families.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .It's a typical General Purpose comparator.Currently, it consists of only 4 elements.The device contains 16 pins.A Through Hole mounting type is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.16 pins are present on the comparator.You may wish to search AD8564 for more solutions that address your specific needs.There is a quiescent current of 7mA in this comparator.For normal use of the device, the nominal supply current should be 10.8mA .Based on the voltage formula, the voltage gain of the part is 69.54dB .A comparator is designed to operate at a maximum supply voltage of 5.5V .This comparator can be supplied with a voltage as low as 4.5V .For normal operation, there should be 5V operating supply voltage applied.
AD8564ANZ Features
CMOS, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 7mA
Voltage Gain: 69.54dB
AD8564ANZ Applications
There are a lot of Analog Devices Inc. AD8564ANZ linear comparators applications.
- Security Detection Systems
- Infotainment and Clusters
- Infotainment & cluster
- Mobile Phones
- Pulse, Squarewave, and Time Delay Generators
- Wearable Devices
- Metering Systems
- General-Purpose, Low-Voltage Applications
- General Purpose Low Voltage Applications
- Automatic Test Equipment