AD8564AR-REEL
| Parameters | |
|---|---|
| Average Bias Current-Max (IIB) | 9μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Dual Supply Voltage | 17V |
| Max Input Current | 4μA |
| Dual Supply Voltage | 5V |
| Input Bias Current | 4μA |
| Neg Supply Voltage-Max (Vsup) | -7V |
| Current - Quiescent (Max) | 14mA 14mA 7mA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 4μA @ 5V |
| CMRR, PSRR (Typ) | 85dB CMRR, 80dB PSRR |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Comparator |
| Max Power Dissipation | 150mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8564 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, TTL |
| Number of Elements | 4 |
| Max Supply Voltage | 5V |
| Min Supply Voltage | -5V |
| Nominal Supply Current | 7mA |
| Power Dissipation | 150mW |
| Propagation Delay | 9.8 ns |
| Quiescent Current | 7mA |
| Turn On Delay Time | 8 ns |
| Response Time | 8 ns |
| Common Mode Rejection Ratio | 85 dB |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 69.54dB |
AD8564AR-REEL Overview
In order to make transportation easier, it is packaged in 16-SOIC (0.154, 3.90mm Width) .There is a CMOS, TTL output type for this comparator.Ready for shipping in Tape & Reel (TR) package.The comparator has a total of 16 terminals.The component belongs to the Comparator family of electrical components.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.This is a typical comparator of type General Purpose .There are a total of 4 elements in it.Electronic comparator includes 16 pins.In general, mounting type Surface Mount is recommended.In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .There are 16 pins on the comparator.Search AD8564 to find more pin-to-pin solutions.There is a quiescent current of 7mA in this comparator.Electronic comparator is recommended that the nominal supply current be 7mA in order to use the device normally.The maximal current your can input into the device is 4μA .Comparator electronics is clear from the voltage formula that the voltage gain of the part is 69.54dB .A comparator's maximum supply voltage is 5V .Comparator electronics is possible to supply this comparator wComparator electronicsh a voltage as low as -5V .
AD8564AR-REEL Features
CMOS, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 7mA
Voltage Gain: 69.54dB
AD8564AR-REEL Applications
There are a lot of Analog Devices Inc. AD8564AR-REEL linear comparators applications.
- Current and voltage sensing
- Factory automation & control
- Infotainment & cluster
- Pulse, Squarewave, and Time Delay Generators
- Analog front end
- Security Detection Systems
- General-Purpose Portable Devices
- Wearable Devices
- Laptop Computers
- Ultra-Low Power Systems
