AD8564ARU-REEL
| Parameters | |
|---|---|
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Comparators |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8564 |
| Pin Count | 16 |
| Output Type | CMOS, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Nominal Supply Current | 7mA |
| Power Dissipation | 150mW |
| Propagation Delay | 9.8 ns |
| Quiescent Current | 7mA |
| Response Time | 8 ns |
| Common Mode Rejection Ratio | 80 dB |
| Input Offset Voltage (Vos) | 7mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 69.54dB |
| Average Bias Current-Max (IIB) | 9μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Dual Supply Voltage | 17V |
| Max Input Current | 4μA |
| Dual Supply Voltage | 5V |
| Input Bias Current | 4μA |
| Current - Quiescent (Max) | 14mA 14mA 7mA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 4μA @ 5V |
| CMRR, PSRR (Typ) | 85dB CMRR, 80dB PSRR |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
AD8564ARU-REEL Overview
For convenience, it is packaged in 16-TSSOP (0.173, 4.40mm Width) .Output type of this comparator is CMOS, TTL .The chip is packaged with Tape & Reel (TR) .The comparator has a total of 16 terminals.The electrical component here belongs to the Comparators family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.The type of the chip can be classified as General Purpose .There are a total of 4 elements in it.There are 16 pins on this board.The recommended mounting type is Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.The comparator has 16 pins.Alternatively, you may search for AD8564 to find more pin-to-pin solutions for your specific needs.A quiescent current of 7mA is observed in this comparator.The nominal supply current of the device should be 7mA for normal use.Electronic comparator is possible to input a maximum of 4μA current into the device.Based on the voltage formula, the voltage gain of the part is 69.54dB .Comparator electronics is necessary to have an operating supply voltage of 5V for normal operation.
AD8564ARU-REEL Features
CMOS, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 7mA
Voltage Gain: 69.54dB
AD8564ARU-REEL Applications
There are a lot of Analog Devices Inc. AD8564ARU-REEL linear comparators applications.
- Power management
- Multivibrators and High-Voltage Digital Logic Gates
- Automotive
- Hand-Held Electronics
- Pulse, Squarewave, and Time Delay Generators
- Self-diagnostics
- Portable and Battery-Powered Systems
- Motor drives
- Mobile Phones and Tablets
- Industrial
