AD8565AKSZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8565 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 850μA |
| Quiescent Current | 850μA |
| Slew Rate | 6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 80nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~16V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 10mV |
| Bandwidth | 5MHz |
| Unity Gain BW-Nom | 5000 kHz |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.8μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 2mV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.6μA |
| Programmable Power | NO |
| Input Capacitance | 1pF |
| Input Voltage Noise Density | 26nV/sqrt Hz |
| Length | 2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8565AKSZ-REEL7 Overview
There is a 5-TSSOP, SC-70-5, SOT-353 case package that contains the instrumentation amplifiers. This is a General Purpose type op amp. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. We are approaching the 5h termination of the year. In this case, there are 5 pins on the board. The linear amplifier should be run at 4.5V at all times, so please keep that in mind when using it. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 5 pins are located on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 10mV. For this electronic part, it is recommended that you mount it with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 850μA . Maintain 80dB as the voltage gain. 1 channels are available on the instrumentation amplifier. On the output type, there are Rail-to-Rail different types of op amps. The instrumentation amplifier is packed in the form of TAPE AND REEL. 850μA quiescent currents are flowing through buffer op amp.
AD8565AKSZ-REEL7 Features
5 Pins
supply voltage of 4.5V
80dB voltage gain
Output Type: Rail-to-Rail
AD8565AKSZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8565AKSZ-REEL7 Instrumentational OP Amps applications.
- Precision measurement
- PDA
- Professional videography
- Digital cameras
- Addition operation circuits
- Thermocouples
- Broadcasting
- Polarized electrodes
- Measurements of Wheatstone bridge
- Navigation
