AD8566WARMZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, ADI0012 |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8566 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | 4.5/16V |
| Number of Circuits | 2 |
| Operating Supply Current | 1.7mA |
| Nominal Supply Current | 1.7mA |
| Quiescent Current | 850μA |
| Slew Rate | 6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 80nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~16V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 10mV |
| Gain Bandwidth Product | 5MHz |
| Unity Gain BW-Nom | 5000 kHz |
| Voltage Gain | 80dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 2mV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.6μA |
| Programmable Power | NO |
| Screening Level | AEC-Q100 |
| Input Capacitance | 1pF |
| Wideband | NO |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8566WARMZ-REEL Overview
In order to protect the op amps, a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 4.5V battery and that the battery should be inserted in the amplifier. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. The buffer op amp includes 8 pins. Regarding input offset voltage, buffer amplifier rates 10mV voltage. The mounting type that is recommended for this electrical part is Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. This op amp can operate from a supply current at 1.7mA. Op amp is a member of the 80dB's 80dB family. During the manufacturing process, this buffer amplifier is divided into 2 circuits. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method. In this case, Automotive, ADI0012 represents the instrumentation amplifiers' series number. There is a quiescent current of 850μA in this operational amplifier circuit.
AD8566WARMZ-REEL Features
8 Pins
supply voltage of 4.5V
80dB voltage gain
Output Type: Rail-to-Rail
AD8566WARMZ-REEL Applications
There are a lot of Analog Devices Inc. AD8566WARMZ-REEL Instrumentational OP Amps applications.
- Commercial audio systems
- High-frequency data acquisition systems
- Radiation thermometry transducers
- Information processing
- Portable media players
- Measurements of Wheatstone bridge
- Band-stop filter
- Semiconductor detectors
- Addition operation circuits
- E-book readers
