AD8567ACPZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8567 |
| Pin Count | 16 |
| Output Type | Rail-to-Rail |
| Number of Channels | 4 |
| Operating Supply Current | 3.4mA |
| Quiescent Current | 850μA |
| Slew Rate | 6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 80nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~16V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 10mV |
| Gain Bandwidth Product | 5MHz |
| Unity Gain BW-Nom | 5000 kHz |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.8μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 2mV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.6μA |
| Programmable Power | NO |
| Input Capacitance | 1pF |
| Wideband | NO |
| Input Voltage Noise Density | 26nV/sqrt Hz |
| Height Seated (Max) | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8567ACPZ-REEL Overview
It is packaged in an 16-VQFN Exposed Pad, CSP-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. The number of terminations is approaching the 16 mark. A total of 16 pins are attached to buffer op amp. I would like to remind you that this buffer op amp should be powered by an 4.5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. The buffer op amp includes 16 pins. There is an input offset voltage of 10mV for this buffer op amp. For this electrical component, Surface Mount is the recommended mounting type. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureA supply current of 3.4mA can be used to operate this linear amplifier. The voltage gain should stay at 80dB. 4 channels are available on the instrumentation amplifier. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The instrumentation amplifier is packed in the form of TAPE AND REEL. There is an 850μA quiescent current running through op amp ic.
AD8567ACPZ-REEL Features
16 Pins
supply voltage of 4.5V
80dB voltage gain
Output Type: Rail-to-Rail
AD8567ACPZ-REEL Applications
There are a lot of Analog Devices Inc. AD8567ACPZ-REEL Instrumentational OP Amps applications.
- Navigation
- Signal filtering
- PDA
- Band-pass filter
- Computer workstations
- Large motor controllers
- Wireless base stations
- Video computer boards
- Test equipment
- Subtraction operation circuits
