AD8597ACPZ-R2
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | AD8597 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Operating Supply Current | 5mA |
| Quiescent Current | 5mA |
| Slew Rate | 16V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 135 dB |
| Current - Input Bias | 25nA |
| Voltage - Supply, Single/Dual (±) | 9V~36V ±4.5V~18V |
| Output Current per Channel | 52mA |
| Input Offset Voltage (Vos) | 10μV |
| Bandwidth | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 116dB |
| Average Bias Current-Max (IIB) | 0.34μA |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Max Frequency | 1kHz |
| Programmable Power | NO |
| Dual Supply Voltage | 15V |
| Input Capacitance | 5.1pF |
| Input Voltage Noise Density | 1.07nV/sqrt Hz |
| Height | 900μm |
| Length | 3.25mm |
| Width | 3.25mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8597ACPZ-R2 Overview
There is a 8-VFDFN Exposed Pad, CSP case package that contains the instrumentation amplifiers. Buffer amps of this type are called General Purpose-types. Upon delivery, op amp ic is packaged in a Cut Tape (CT) case. During the past two weeks, there have been close to 8 terminations. The pins on this board total to 8 in total. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The op amp ic has an array of 8 pins on it. With regard to input offset voltage, instrumentation amplifier is rated at 10μV. This electronic part is best mounted with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 5mA . 116dB should remain the voltage gain. On the buffer amps, there are 1 channels that can be used. It is used TAPE AND REEL to pack the op amps. Currently, linear amplifier is operating with a quiescent current of 5mA.
AD8597ACPZ-R2 Features
8 Pins
supply voltage of 15V
116dB voltage gain
AD8597ACPZ-R2 Applications
There are a lot of Analog Devices Inc. AD8597ACPZ-R2 Instrumentational OP Amps applications.
- Proportional counter tubes
- E-book readers
- Multiplication circuits
- Subtraction operation circuits
- Digital cameras
- Image computer boards
- Addition operation circuits
- Wireless base stations
- Differentiator circuits
- RF cable systems
