AD8601WDRTZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8601 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 1.2mA |
| Quiescent Current | 1.2mA |
| Slew Rate | 6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 8MHz |
| Gain Bandwidth Product | 8.4MHz |
| Unity Gain BW-Nom | 8200 kHz |
| Voltage Gain | 95.56dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 1.3mV |
| Settling Time | 1 μs |
| Low-Bias | YES |
| Micropower | NO |
| Max Frequency | 10kHz |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Programmable Power | NO |
| Height | 1.3mm |
| Length | 3mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8601WDRTZ-REEL7 Overview
There is a SC-74A, SOT-753 case package that contains the instrumentation amplifiers. Buffer amps of this type are called General Purpose-types. A Tape & Reel (TR) case is used for delivering the op amp. We are approaching the 5h termination of the year. A total of 5 pins are attached to buffer op amp. It is important to remember that this op amp should be operated at a voltage of 3V volts. It should be noted that this op amp is a type of Operational Amplifier device. In total, the buffer amplifier consists of 5 pins. With regard to input offset voltage, instrumentation amplifier is rated at 500μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. As long as the supply current of the chip does not exceed 1.2mA, this op amp ic can operate. Keeping the voltage gain at 95.56dB is the best course of action. Op amp ic has 1 channels. On the output type, there are Rail-to-Rail different types of op amps. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. The Automotive indicates the series number of the op amp. There is a quiescent current of 1.2mA in this operational amplifier circuit.
AD8601WDRTZ-REEL7 Features
5 Pins
supply voltage of 3V
95.56dB voltage gain
Output Type: Rail-to-Rail
AD8601WDRTZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8601WDRTZ-REEL7 Instrumentational OP Amps applications.
- High gain DC amplifier
- Fission chambers
- High-frequency data acquisition systems
- Automotive sensors
- Video computer boards
- Weighing systems
- Thermocouples
- Industrial applications including automation
- Car stereo
- Scintillation detectors
