AD8602ARZ

2 Channels 50mA per Channel 0.2pA 80 dB Instrumentational OP Amps 0.001μA 5V 2.7V~5.5V AD8602 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-AD8602ARZ
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 865
Description: 2 Channels 50mA per Channel 0.2pA 80 dB Instrumentational OP Amps 0.001μA 5V 2.7V~5.5V AD8602 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
Series	DigiTrim®
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	AD8602
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	5V
Number of Channels	2
Operating Supply Current	2.4mA
Quiescent Current	1.2mA
Supply Current-Max	3mA
Slew Rate	6V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	80 dB
Current - Input Bias	0.2pA
Voltage - Supply, Single/Dual (±)	2.7V~5.5V
Output Current per Channel	50mA
Input Offset Voltage (Vos)	500μV
Bandwidth	8.4MHz
Unity Gain BW-Nom	8200 kHz
Voltage Gain	98.06dB
Average Bias Current-Max (IIB)	0.001μA
Power Supply Rejection Ratio (PSRR)	75dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Voltage - Input Offset	80μV
Settling Time	1 μs
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00006μA
Programmable Power	NO
Input Voltage Noise Density	33nV/sqrt Hz
Height	1.5mm
Length	5mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

AD8602ARZ Overview

Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. General Purpose-type instrumentation amplifiers are used in this application. The op amp is delivered to you in a Tube case. The number of terminations approaches 8. The total number of pins on linear amplifier is 8. It would be helpful if you could remember that this op amp ic should be powered by an 3V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 8 pins are located on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 500μV. For this electronic part, it is recommended that you mount it with type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. The buffer amplifier is capable of operating from a supply current of 2.4mA . It is a member of the 98.06dB's 98.06dB family. There are a total of 2 channels available on the op amps. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The operating supply voltage of instrumentation amplifier is rated 5V voltage. DigiTrim? is the number that corresponds to the series of the buffer op amp. Buffer amplifier has a quiescent current of 1.2mA.