Parameters |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
6V |
Voltage - Input Offset |
80μV |
Settling Time |
1 μs |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.00006μA |
Programmable Power |
NO |
Wideband |
NO |
Input Voltage Noise Density |
33nV/sqrt Hz |
Height Seated (Max) |
1.75mm |
Length |
4.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
DigiTrim® |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
AD8602 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Power Supplies |
3/5V |
Number of Channels |
2 |
Operating Supply Current |
2.4mA |
Quiescent Current |
1.2mA |
Supply Current-Max |
3mA |
Slew Rate |
6V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
80 dB |
Current - Input Bias |
0.2pA |
Voltage - Supply, Single/Dual (±) |
2.7V~5.5V |
Output Current per Channel |
50mA |
Input Offset Voltage (Vos) |
500μV |
Gain Bandwidth Product |
8.4MHz |
Unity Gain BW-Nom |
8200 kHz |
Voltage Gain |
98.06dB |
Average Bias Current-Max (IIB) |
0.001μA |
Power Supply Rejection Ratio (PSRR) |
75dB |
Low-Offset |
NO |
AD8602ARZ-REEL Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used for delivering the op amp. We are approaching the 8h termination of the year. Buffer amplifier has a total of 8 pins on it. Please take in mind that op amp should be run at 3V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. In terms of input offset voltage, operational amplifier rates 500μV. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . A supply current of 2.4mA can be used to operate this linear amplifier. You should keep the voltage gain at 98.06dB for the time being. 2 channels are available on the instrumentation amplifier. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. As a result of this, the buffer amplifier is packed in TAPE AND REEL. DigiTrim? corresponds to linear amplifier's series. Linear amplifier has a quiescent current of 1.2mA.
AD8602ARZ-REEL Features
8 Pins
supply voltage of 3V
98.06dB voltage gain
Output Type: Rail-to-Rail
AD8602ARZ-REEL Applications
There are a lot of Analog Devices Inc. AD8602ARZ-REEL Instrumentational OP Amps applications.
- Ultrasound transducers
- Gaming industry
- Band-pass filter
- Band-stop filter
- Proportional counter tubes
- Medical imaging
- Oscilloscopes
- Power generator
- Vehicle electronics
- Video conversion and routing