Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
DigiTrim® |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
AD8602 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Power Supplies |
3/5V |
Number of Channels |
2 |
Operating Supply Current |
2.4mA |
Quiescent Current |
1.2mA |
Supply Current-Max |
3mA |
Slew Rate |
6V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
80 dB |
Current - Input Bias |
0.2pA |
Voltage - Supply, Single/Dual (±) |
2.7V~5.5V |
Output Current per Channel |
50mA |
Input Offset Voltage (Vos) |
500μV |
Bandwidth |
8.4MHz |
Unity Gain BW-Nom |
8200 kHz |
Voltage Gain |
98.06dB |
Average Bias Current-Max (IIB) |
0.001μA |
Power Supply Rejection Ratio (PSRR) |
75dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
6V |
Voltage - Input Offset |
80μV |
Settling Time |
1 μs |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.00006μA |
Programmable Power |
NO |
Input Voltage Noise Density |
33nV/sqrt Hz |
Height Seated (Max) |
1.75mm |
Length |
4.9mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
AD8602ARZ-REEL7 Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. Buffer amps of this type are called General Purpose-types. Linear amplifier is delivered in a Tape & Reel (TR) case. There have been a total of 8 terminations over the past year. There are a total of 8 pins on this op amp. This linear amplifier should be powered by an 3V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The buffer op amp includes 8 pins. In terms of the input offset voltage, instrumentation amplifier rates at 500μV. This electronic part is best mounted with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 2.4mA and 10 . Voltage gain should remain at 98.06dB. 2 channels are available on the instrumentation amplifier. On the output type, there are Rail-to-Rail different types of op amps. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method. As the name implies, DigiTrim? refers to the series of the buffer op amp. Buffer amplifier has a quiescent current of 1.2mA.
AD8602ARZ-REEL7 Features
8 Pins
supply voltage of 3V
98.06dB voltage gain
Output Type: Rail-to-Rail
AD8602ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8602ARZ-REEL7 Instrumentational OP Amps applications.
- Biopotential
- Band-pass filter
- Mobile phone
- High gain DC amplifier
- Automotive sensors
- Medical instruments
- Radiation thermometry transducers
- Power generator
- Ultrasound transducers
- Video conversion and routing