AD8603AUJZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8603 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Channels | 1 |
| Operating Supply Current | 50μA |
| Quiescent Current | 50μA |
| Supply Current-Max | 0.06mA |
| Slew Rate | 0.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5V ±0.9V~2.5V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 300μV |
| Gain Bandwidth Product | 400kHz |
| Unity Gain BW-Nom | 385 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 12μV |
| Settling Time | 23 μs |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Input Capacitance | 2.5pF |
| Wideband | NO |
| Input Voltage Noise Density | 25nV/sqrt Hz |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8603AUJZ-REEL Overview
Packaging for the buffer amplifier is in the form of a SOT-23-5 Thin, TSOT-23-5 case. Buffer amps of this type are called General Purpose-types. A Tape & Reel (TR) case is used for delivering the op amp. There is a growing number of terminations approaching the number of 5. Buffer amplifier has a total of 5 pins. As a reminder, this buffer op amp should be powered by 1.8V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. In total, the buffer amplifier consists of 5 pins. There is an input offset voltage of 300μV for this buffer op amp. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 50μA can be used to operate this linear amplifier. You should keep the voltage gain at 120dB for the time being. On the buffer amps, there are 1 channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of the buffer op amp is rated at 3V. It is used TAPE AND REEL to pack the op amps. There is a quiescent current of 50μA in this operational amplifier circuit.
AD8603AUJZ-REEL Features
5 Pins
supply voltage of 1.8V
120dB voltage gain
Output Type: Rail-to-Rail
AD8603AUJZ-REEL Applications
There are a lot of Analog Devices Inc. AD8603AUJZ-REEL Instrumentational OP Amps applications.
- Image computer boards
- Video data acquisition
- Polarized electrodes
- Professional videography
- Radiation thermometry transducers
- Measurements of Wheatstone bridge
- Power transmission
- Home audio systems
- Laptop
- Division circuits
