AD8604ARUZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | DigiTrim® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8604 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/5V |
| Number of Channels | 4 |
| Operating Supply Current | 4.8mA |
| Quiescent Current | 1.2mA |
| Supply Current-Max | 6mA |
| Slew Rate | 6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 600μV |
| Bandwidth | 8.4MHz |
| Unity Gain BW-Nom | 8200 kHz |
| Voltage Gain | 98.06dB |
| Average Bias Current-Max (IIB) | 0.001μA |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 80μV |
| Settling Time | 1 μs |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Input Voltage Noise Density | 33nV/sqrt Hz |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8604ARUZ-REEL Overview
In order to protect the op amps, a 14-TSSOP (0.173, 4.40mm Width) case is used. Buffer amps of this type are called General Purpose-types. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 14. A total of 14 pins are attached to buffer op amp. It is important to remember that this op amp should be operated at a voltage of 3V volts. Instrumentation amplifier is a part of Operational Amplifier. 14 pins are located on the operational amplifiers. Op amp ic rates 600μV for input offset voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 4.8mA and 10 . Keeping the voltage gain at 98.06dB is the best course of action. There are a total of 4 channels available on the op amps. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. In this case, DigiTrim? represents the instrumentation amplifiers' series number. There is a quiescent current of 1.2mA in this operational amplifier circuit.
AD8604ARUZ-REEL Features
14 Pins
supply voltage of 3V
98.06dB voltage gain
Output Type: Rail-to-Rail
AD8604ARUZ-REEL Applications
There are a lot of Analog Devices Inc. AD8604ARUZ-REEL Instrumentational OP Amps applications.
- Ultrasound transducers
- Signal transformation
- Inverse/same-phase proportional circuit
- Medical instruments
- Micro signal measurement
- Non-polarized electrodes
- Comparator
- Scintillation detectors
- Differentiator circuits
- Industrial control system
