AD8604ARZ-REEL
| Parameters | |
|---|---|
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | DigiTrim® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8604 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/5V |
| Number of Channels | 4 |
| Operating Supply Current | 4.8mA |
| Quiescent Current | 1.2mA |
| Supply Current-Max | 6mA |
| Slew Rate | 6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 600μV |
| Gain Bandwidth Product | 8.4MHz |
| Unity Gain BW-Nom | 8200 kHz |
| Voltage Gain | 98.06dB |
| Average Bias Current-Max (IIB) | 0.001μA |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 80μV |
| Settling Time | 1 μs |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Input Voltage Noise Density | 33nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
AD8604ARZ-REEL Overview
Op amp is packaged in 14-SOIC (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. There have been a total of 14 terminations over the past year. In this case, there are 14 pins on the board. Please take in mind that this instrumentation amplifier should be run at 3V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. Linear amplifier includes 14 pins. Regarding input offset voltage, buffer amplifier rates 600μV voltage. Surface Mount is the recommended mounting type for this linear amplifier. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . This op amp can operate from a supply current at 4.8mA. There should be no change in the voltage gain at 98.06dB. 4 channels are available on the instrumentation amplifier. On the output type, there are Rail-to-Rail different types of op amps. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. Instrumentation amplifiers are numbered by their DigiTrim? series. The quiescent current is 1.2mA.
AD8604ARZ-REEL Features
14 Pins
supply voltage of 3V
98.06dB voltage gain
Output Type: Rail-to-Rail
AD8604ARZ-REEL Applications
There are a lot of Analog Devices Inc. AD8604ARZ-REEL Instrumentational OP Amps applications.
- Image computer boards
- Precision measurement
- Portable media players
- Radar
- Signal operation
- Commercial audio systems
- Television
- Active probe
- Fast A/D and D/A converters
- Power transmission
