AD8604DRUZ-REEL

4 Channels 50mA per Channel 0.2pA 80 dB Instrumentational OP Amps 0.001μA 2.7V~5.5V AD8604 14 Pins 14-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-AD8604DRUZ-REEL
Package: 14-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 693
Description: 4 Channels 50mA per Channel 0.2pA 80 dB Instrumentational OP Amps 0.001μA 2.7V~5.5V AD8604 14 Pins 14-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	14
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TAPE AND REEL
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	3V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	AD8604
Pin Count	14
Output Type	Rail-to-Rail
Power Supplies	3/5V
Number of Channels	4
Operating Supply Current	4.8mA
Quiescent Current	1.2mA
Supply Current-Max	6mA
Slew Rate	6V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	80 dB
Current - Input Bias	0.2pA
Voltage - Supply, Single/Dual (±)	2.7V~5.5V
Output Current per Channel	50mA
Input Offset Voltage (Vos)	600μV
Gain Bandwidth Product	8MHz
Unity Gain BW-Nom	8200 kHz
Voltage Gain	95.56dB
Average Bias Current-Max (IIB)	0.001μA
Power Supply Rejection Ratio (PSRR)	75dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Voltage - Input Offset	1.3mV
Settling Time	1 μs
Low-Bias	YES
Bias Current-Max (IIB) @25C	0.0002μA
Input Voltage Noise Density	33nV/sqrt Hz
Height Seated (Max)	1.2mm
Length	5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

AD8604DRUZ-REEL Overview

Op amp is packaged in 14-TSSOP (0.173, 4.40mm Width) case. An op amp of this type is a General Purpose-type. A Tape & Reel (TR) case is used for delivering the op amp. It is estimated that there will be at least 14 terminations this year. A total of 14 pins are located on this board. Please take in mind that op amp should be run at 3V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 14 pins are located on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 600μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . An 4.8mA volt supply current is needed for this linear amplifier to operate. It is a member of the 95.56dB's 95.56dB family. There are a total of 4 channels available on the op amps. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. Buffer amplifier has a quiescent current of 1.2mA.