AD8604DRZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8604 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | 3/5V |
| Operating Supply Current | 4.8mA |
| Quiescent Current | 1.2mA |
| Supply Current-Max | 6mA |
| Slew Rate | 6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 600μV |
| Gain Bandwidth Product | 8.4MHz |
| Unity Gain BW-Nom | 8200 kHz |
| Voltage Gain | 95.56dB |
| Average Bias Current-Max (IIB) | 0.001μA |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 1.3mV |
| Settling Time | 1 μs |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Input Voltage Noise Density | 33nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8604DRZ-REEL Overview
The linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case. There are two types of operational amplifiers in this circuit. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 14. In total, there are 14 pins on this op amp ic. I would like to remind you that this buffer op amp should be powered by an 3V battery. Instrumentation amplifier is a part of Operational Amplifier. 14 pins are located on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 600μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. Using an 4.8mA supply current, this operational amplifier ics can be operated. 95.56dB should remain the voltage gain. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The op amp is rated for an operating supply voltage of 4. It is used TAPE AND REEL to pack the op amps. The current is quiescent at 1.2mA.
AD8604DRZ-REEL Features
14 Pins
supply voltage of 3V
95.56dB voltage gain
Output Type: Rail-to-Rail
AD8604DRZ-REEL Applications
There are a lot of Analog Devices Inc. AD8604DRZ-REEL Instrumentational OP Amps applications.
- Digital cameras
- Navigation
- Car stereo
- Video data acquisition
- Communication
- Voltage regulation circuit
- pH (acidity)
- Proportional counter tubes
- Active probe
- Portable media players
