AD8605ARTZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | DigiTrim® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8605 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 1.2mA |
| Quiescent Current | 1.2mA |
| Slew Rate | 5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 300μV |
| Gain Bandwidth Product | 10MHz |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 95dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 80μV |
| Settling Time | 1 μs |
| Low-Bias | YES |
| Input Capacitance | 8.8pF |
| Input Voltage Noise Density | 8nV/sqrt Hz |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8605ARTZ-REEL Overview
Packaged in a SC-74A, SOT-753 case, the buffer op amp is ready to use. The instrumentation amplifier in this picture is of the General Purpose-type. The op amp is delivered to you in a Tape & Reel (TR) case. The number of terminations approaches 5. Linear amplifier has a total of 5 pins. Please take in mind that this instrumentation amplifier should be run at 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The op amp ic has an array of 5 pins on it. Op amp rates 300μV as input offset voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, op amp ranges -40°C~125°C. A supply current of 1.2mA can be used to operate this linear amplifier. There should be no change in the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The instrumentation amplifier is packed in the form of TAPE AND REEL. Buffer op amp series numbers are indicated by the DigiTrim?. The current is quiescent at 1.2mA.
AD8605ARTZ-REEL Features
5 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
AD8605ARTZ-REEL Applications
There are a lot of Analog Devices Inc. AD8605ARTZ-REEL Instrumentational OP Amps applications.
- Voltage regulation circuit
- Television broadcasting equipment
- Blood pressure sensors
- Broadcasting
- Navigation
- Oscilloscopes
- Signal operation
- Digital cameras
- E-book readers
- Power control
