AD8605ARTZ-REEL7
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8605 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 1.2mA |
| Quiescent Current | 1.2mA |
| Slew Rate | 5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 10MHz |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 95dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 80μV |
| Gain | 120 dB |
| Settling Time | 1 μs |
| Low-Bias | YES |
| Max Frequency | 1MHz |
| Input Capacitance | 8.8pF |
| Input Voltage Noise Density | 8nV/sqrt Hz |
| Height | 1.3mm |
| Length | 3mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | DigiTrim® |
AD8605ARTZ-REEL7 Overview
Packaged in a SC-74A, SOT-753 case, the buffer op amp is ready to use. There are two types of operational amplifiers in this circuit. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. There is a growing number of terminations approaching the number of 5. In total, there are 5 pins on this op amp ic. This linear amplifier should be powered by an 5V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 5 pins are located on the operational amplifiers. Op amp ic rates 300μV for input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 1.2mA and 10 . Keeping the voltage gain at 120dB is the best course of action. There are 1 channels on the operational amplifiers. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method. In this case, DigiTrim? represents the instrumentation amplifiers' series number. Linear amplifier has a quiescent current of 1.2mA.
AD8605ARTZ-REEL7 Features
5 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
AD8605ARTZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8605ARTZ-REEL7 Instrumentational OP Amps applications.
- Multiplication circuits
- earphone
- Industrial control system
- High speed sample
- Signal operation
- Integrator circuits
- Professional videography
- Precision measurement
- High gain DC amplifier
- Power generator
