Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
1.8V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
AD8607 |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
3V |
Number of Channels |
2 |
Operating Supply Current |
100μA |
Quiescent Current |
50μA |
Slew Rate |
0.1V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
100 dB |
Current - Input Bias |
0.2pA |
Voltage - Supply, Single/Dual (±) |
1.8V~5V ±0.9V~2.5V |
Output Current per Channel |
70mA |
Input Offset Voltage (Vos) |
300μV |
Gain Bandwidth Product |
400kHz |
Unity Gain BW-Nom |
385 kHz |
Voltage Gain |
113.06dB |
Average Bias Current-Max (IIB) |
0.0005μA |
Power Supply Rejection Ratio (PSRR) |
100dB |
Low-Offset |
YES |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
6V |
Voltage - Input Offset |
12μV |
Settling Time |
23 μs |
Low-Bias |
YES |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.000001μA |
Input Capacitance |
2.5pF |
Input Voltage Noise Density |
25nV/sqrt Hz |
Height Seated (Max) |
1.75mm |
Length |
4.9mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
AD8607ARZ-REEL Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. The instrumentation amplifier in this picture is of the General Purpose-type. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 8. The pins on this board total to 8 in total. As a reminder, this buffer op amp should be powered by 1.8V battery and that the battery should be inserted in the amplifier. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The op amp ic has an array of 8 pins on it. The input offset voltage is 300μV. This electronic part is recommended for mounting type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. In order for this instrumentation amplifier to operate, the supply current needs to be between 100μA and 10 . It is recommended to keep the voltage gain at 113.06dB at all times. There are a total of 2 channels available on the op amps. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of instrumentation amplifier is rated 3V voltage. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. There is an 50μA quiescent current in linear amplifier.
AD8607ARZ-REEL Features
8 Pins
supply voltage of 1.8V
113.06dB voltage gain
Output Type: Rail-to-Rail
AD8607ARZ-REEL Applications
There are a lot of Analog Devices Inc. AD8607ARZ-REEL Instrumentational OP Amps applications.
- Integrator circuits
- E-book readers
- Exponential operation circuits
- Oscilloscopes
- Cinema or auditorium audio system
- Information processing
- Signal filtering
- Thermocouples
- Ultrasound transducers
- Hand-held batteries