Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
1.8V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
AD8609 |
Pin Count |
14 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
3V |
Power Supplies |
1.8/5V |
Number of Channels |
4 |
Operating Supply Current |
200μA |
Nominal Supply Current |
200μA |
Quiescent Current |
50μA |
Slew Rate |
0.1V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
100 dB |
Current - Input Bias |
0.2pA |
Voltage - Supply, Single/Dual (±) |
1.8V~5V ±0.9V~2.5V |
Output Current per Channel |
70mA |
Input Offset Voltage (Vos) |
300μV |
Bandwidth |
400 kHz |
Unity Gain BW-Nom |
385 kHz |
Voltage Gain |
113.06dB |
Average Bias Current-Max (IIB) |
0.0005μA |
Power Supply Rejection Ratio (PSRR) |
100dB |
Low-Offset |
YES |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
6V |
Voltage - Input Offset |
12μV |
Settling Time |
23 μs |
Low-Bias |
YES |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.000001μA |
Programmable Power |
NO |
Input Capacitance |
2.5pF |
Input Voltage Noise Density |
25nV/sqrt Hz |
Height |
1mm |
Length |
5mm |
Width |
4.4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
AD8609ARUZ Overview
The linear amplifier is packaged in a 14-TSSOP (0.173, 4.40mm Width) case. This is a General Purpose type op amp. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. A total of 14 terminations have been reported in the past few weeks. In total, there are 14 pins on this op amp ic. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 1.8V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. An 14-pin op amp ic is included in the package. In terms of the input offset voltage, instrumentation amplifier rates at 300μV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . A supply current of 200μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 113.06dB. On the buffer amps, there are 4 channels that can be used. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of the buffer op amp is rated at 3V. Buffer amplifier has a quiescent current of 50μA.
AD8609ARUZ Features
14 Pins
supply voltage of 1.8V
113.06dB voltage gain
Output Type: Rail-to-Rail
AD8609ARUZ Applications
There are a lot of Analog Devices Inc. AD8609ARUZ Instrumentational OP Amps applications.
- Fission chambers
- High speed sample
- Integrator circuits
- Medical instruments
- Switching amplifier
- Portable media players
- Mobile phone
- Wireless base stations
- Differentiator circuits
- Television broadcasting equipment