Parameters |
Number of Functions |
4 |
Supply Voltage |
1.8V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
AD8609 |
Pin Count |
14 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
3V |
Power Supplies |
1.8/5V |
Number of Channels |
4 |
Operating Supply Current |
200μA |
Quiescent Current |
50μA |
Slew Rate |
0.1V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
100 dB |
Current - Input Bias |
0.2pA |
Voltage - Supply, Single/Dual (±) |
1.8V~5V ±0.9V~2.5V |
Output Current per Channel |
70mA |
Input Offset Voltage (Vos) |
300μV |
Bandwidth |
400 kHz |
Unity Gain BW-Nom |
385 kHz |
Voltage Gain |
113.06dB |
Average Bias Current-Max (IIB) |
0.0005μA |
Power Supply Rejection Ratio (PSRR) |
100dB |
Low-Offset |
YES |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
6V |
Voltage - Input Offset |
12μV |
Settling Time |
23 μs |
Low-Bias |
YES |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.000001μA |
Programmable Power |
NO |
Input Capacitance |
2.5pF |
Input Voltage Noise Density |
25nV/sqrt Hz |
Height |
1.5mm |
Length |
8.75mm |
Width |
4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
AD8609ARZ Overview
Packaged in a 14-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. Buffer amps of this type are called General Purpose-types. There is a Tube case that is delivered with the instrumentation amplifiers. It is estimated that there will be at least 14 terminations this year. Buffer amplifier has a total of 14 pins. As a reminder, this buffer op amp should be powered by 1.8V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The op amp ic has an array of 14 pins on it. With regard to input offset voltage, instrumentation amplifier is rated at 300μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . Using an 200μA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain at 113.06dB. Instrumentation amplifier has 4 channels on it. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of instrumentation amplifier is rated 3V voltage. As a result, linear amplifier's quiescent current is 50μA.
AD8609ARZ Features
14 Pins
supply voltage of 1.8V
113.06dB voltage gain
Output Type: Rail-to-Rail
AD8609ARZ Applications
There are a lot of Analog Devices Inc. AD8609ARZ Instrumentational OP Amps applications.
- Cinema or auditorium audio system
- Signal filtering
- Mobile phone
- Proportional operation circuits
- Signal transformation
- Fast A/D and D/A converters
- Video data acquisition
- E-book readers
- Blood pressure sensors
- Commercial audio systems