AD8610ARMZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8610 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 3.5mA |
| Quiescent Current | 3.5mA |
| Slew Rate | 60V/μs |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 3pA |
| Voltage - Supply, Single/Dual (±) | ±5V~13V |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 100μV |
| Gain Bandwidth Product | 25MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 25000 kHz |
| Voltage Gain | 105.11dB |
| Average Bias Current-Max (IIB) | 0.0025μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Voltage - Input Offset | 85μV |
| Settling Time | 600 ns |
| Input Capacitance | 15pF |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
AD8610ARMZ-R7 Overview
A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used to package the op amp. Buffer amps of this type are called J-FET-types. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. This linear amplifier should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 8 pins are included on the operational amplifiers. There is an input offset voltage of 100μV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 3.5mA and 10 . 105.11dB should remain the voltage gain. The op amp ic has 1 channels on it. There is an 3.5mA quiescent current running through op amp ic.
AD8610ARMZ-R7 Features
8 Pins
supply voltage of 5V
105.11dB voltage gain
AD8610ARMZ-R7 Applications
There are a lot of Analog Devices Inc. AD8610ARMZ-R7 Instrumentational OP Amps applications.
- Semiconductor detectors
- single/dual op amp sum and difference circuits
- Non-polarized electrodes
- Test and measurement instruments
- Fission chambers
- Automotive sensors
- High speed sample
- Communication
- Proportional counter tubes
- Portable docking station
