Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
AD8610 |
Pin Count |
8 |
Number of Channels |
1 |
Operating Supply Current |
3.5mA |
Max Supply Current |
3mA |
Quiescent Current |
3.5mA |
Slew Rate |
60V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
J-FET |
Common Mode Rejection Ratio |
110 dB |
Current - Input Bias |
3pA |
Voltage - Supply, Single/Dual (±) |
±5V~13V |
Output Current per Channel |
45mA |
Input Offset Voltage (Vos) |
100μV |
Bandwidth |
25MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
25000 kHz |
Voltage Gain |
105.11dB |
Average Bias Current-Max (IIB) |
0.0025μA |
Power Supply Rejection Ratio (PSRR) |
110dB |
Low-Offset |
YES |
Frequency Compensation |
YES |
Voltage - Input Offset |
85μV |
Settling Time |
600 ns |
Low-Bias |
YES |
Dual Supply Voltage |
9V |
Input Capacitance |
15pF |
Input Voltage Noise Density |
6nV/sqrt Hz |
Height |
1.5mm |
Length |
5mm |
Width |
4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
AD8610ARZ Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. Buffer amps of this type are called J-FET-types. The op amp is delivered to you in a Tube case. The number of terminations approaches 8. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are included on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 100μV voltage. Surface Mount is the recommended mounting type for this linear amplifier. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. You can run this op amp ic on 3.5mA . Keeping the voltage gain at 105.11dB is the best course of action. Op amp ic has 1 channels. As a result, linear amplifier's quiescent current is 3.5mA.
AD8610ARZ Features
8 Pins
supply voltage of 5V
105.11dB voltage gain
AD8610ARZ Applications
There are a lot of Analog Devices Inc. AD8610ARZ Instrumentational OP Amps applications.
- Precision measurement
- Video conversion and routing
- High-frequency data acquisition systems
- Car stereo
- Subtraction operation circuits
- Signal amplification
- Large motor controllers
- High/low-pass filter circuit
- Automotive sensors
- Measurements of Wheatstone bridge