AD8611AR-REEL
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 50mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8611 |
| Pin Count | 8 |
| Output Type | Complementary, TTL |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 10mA |
| Power Dissipation | 50mW |
| Propagation Delay | 5.5 ns |
| Quiescent Current | 4mA |
| Turn On Delay Time | 5.5 ns |
| Response Time | 4.5 ns |
| Common Mode Rejection Ratio | 85 dB |
| Voltage - Supply, Single/Dual (±) | 3V~5V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 69.54dB |
| Average Bias Current-Max (IIB) | 4μA |
| Power Supply Rejection Ratio (PSRR) | 73dB |
| Supply Voltage Limit-Max | 7V |
| Input Bias Current | 6μA |
| Current - Quiescent (Max) | 10mA 4mA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 6μA @ 5V |
| CMRR, PSRR (Typ) | 85dB CMRR, 73dB PSRR |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD8611AR-REEL Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .A comparator with a Complementary, TTL output is used here.The part will be shipped by Tape & Reel (TR) .There are 8 terminals on the comparator.Electronic comparator is a component of the Comparator family.With a 3V voltage supply, the comparator can perform multiple demanding tasks.Electronic comparator can be classified as a with Latch chip.Currently, it consists of only 1 elements.There are 8 pins on this board.The recommended mounting type is Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .There are 8 pins on the comparator.Try search AD8611 to get more pin-to-pin solutions for your special needs.The comparator displays a quiescent current of 4mA .Electronic comparator is recommended that the nominal supply current for the device be set to 10mA .A power supply of 3/5V is sufficient for the operation of the device.A voltage gain of 69.54dB can be determined from the voltage formula for the part.
AD8611AR-REEL Features
Complementary, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 4mA
Voltage Gain: 69.54dB
AD8611AR-REEL Applications
There are a lot of Analog Devices Inc. AD8611AR-REEL linear comparators applications.
- Mobile Phones and Tablets
- Lithium ion battery monitoring
- Wide Range VCO; MOS Clock Timers
- Window Comparators, Multivibrators
- Power management
- Simple Analog-to-Digital Converters (ADCs)
- Current and voltage sensing
- Wearable Devices
- Automotive
- Hand-Held Electronics
