AD8611ARM-R2
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8611 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Complementary, TTL |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 10mA |
| Power Dissipation | 50mW |
| Propagation Delay | 5.5 ns |
| Quiescent Current | 4mA |
| Response Time | 4.5 ns |
| Common Mode Rejection Ratio | 85 dB |
| Voltage - Supply, Single/Dual (±) | 3V~5V |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 69.54dB |
| Average Bias Current-Max (IIB) | 4μA |
| Power Supply Rejection Ratio (PSRR) | 73dB |
| Supply Voltage Limit-Max | 7V |
| Input Bias Current | 6μA |
| Current - Quiescent (Max) | 10mA 4mA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 6μA @ 5V |
| CMRR, PSRR (Typ) | 85dB CMRR, 73dB PSRR |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD8611ARM-R2 Overview
For convenience, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .Output type of this comparator is Complementary, TTL .This device is designed in Tape & Reel (TR) case.The comparator has 8 terminals.The component belongs to the Comparator family of electrical components.Supplied by 3V voltage, the comparator can accomplish the many demanding tasks.Electronic comparator can be classified as a with Latch chip.The total number of elements is 1 .The board includes 8 pins.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.The comparator consists of 8 pins.In order to find a solution that meets your specific needs, search AD8611 for more pin-to-pin solutions.A quiescent current of 4mA is displayed by this comparator.Normally, the nominal supply current should be 10mA .Electronic comparator is sufficient to run the device wElectronic comparatorh 3/5V power supplies.Comparator electronics follows that the voltage gain of the part is 69.54dB .
AD8611ARM-R2 Features
Complementary, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 4mA
Voltage Gain: 69.54dB
AD8611ARM-R2 Applications
There are a lot of Analog Devices Inc. AD8611ARM-R2 linear comparators applications.
- Alarm and Monitoring Circuits
- Motor drives
- Laptop Computers
- Self-diagnostics
- Zero-Crossing Detectors
- Limit Comparators
- Appliances
- Window Comparators, Multivibrators
- Hand-Held Electronics
- Battery-Powered Electronics
