AD8611ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 50mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8611 |
| Pin Count | 8 |
| Output Type | Complementary, TTL |
| Power Supplies | 3/5V |
| Number of Circuits | 1 |
| Nominal Supply Current | 10mA |
| Power Dissipation | 50mW |
| Max Supply Current | 10mA |
| Propagation Delay | 5.5 ns |
| Quiescent Current | 4mA |
| Response Time | 4.5 ns |
| Common Mode Rejection Ratio | 85 dB |
| Voltage - Supply, Single/Dual (±) | 3V~5V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 69.54dB |
| Average Bias Current-Max (IIB) | 4μA |
| Power Supply Rejection Ratio (PSRR) | 73dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 6μA |
| Input Bias Current | 6μA |
| Current - Quiescent (Max) | 10mA 4mA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 6μA @ 5V |
| CMRR, PSRR (Typ) | 85dB CMRR, 73dB PSRR |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8611ARZ Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) to facilitate transportation.Output type Complementary, TTL is used for this comparator.This device is designed in Tube case.The comparator has a total of 8 terminals.Electronic comparator is a component of the Comparator family.A comparator supplied with 3V voltage can complete many demanding tasks.Electronic comparator is possible to classify the chip as with Latch .The pinout of the component starts from 8 pins it has.The type of mounting recommended is Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .8 pins are available on the comparator.Search AD8611 to find more pin-to-pin solutions.In this comparator, the quiescent current is 4mA .The PCB or other board can be mounted using the Surface Mount on it.Normally, the nominal supply current should be 10mA when using the device.The compartator could be damaged if the current supply exceeds 10mA .There is sufficient power to run the device from 3/5V power supplies.Electronic comparator is possible to input a maximum current of 6μA into the device.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 69.54dB .
AD8611ARZ Features
Complementary, TTL output capability
with Latch IC
Operates under -40°C~85°C
Quiescent Current: 4mA
Voltage Gain: 69.54dB
AD8611ARZ Applications
There are a lot of Analog Devices Inc. AD8611ARZ linear comparators applications.
- Lithium ion battery monitoring
- High-Speed Differential Line Receiver
- Automatic Test Equipment
- Window Comparators
- Portable and Battery-Powered Systems
- General-Purpose, Low-Voltage Applications
- Laptop Computers
- Zero-Crossing Detectors
- Window Comparators, Multivibrators
- Automotive
