AD8611ARZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 50mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8611 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Complementary, TTL |
| Power Supplies | 3/5V |
| Number of Circuits | 1 |
| Nominal Supply Current | 10mA |
| Power Dissipation | 50mW |
| Propagation Delay | 5.5 ns |
| Quiescent Current | 4mA |
| Response Time | 4.5 ns |
| Common Mode Rejection Ratio | 85 dB |
| Voltage - Supply, Single/Dual (±) | 3V~5V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 69.54dB |
| Average Bias Current-Max (IIB) | 4μA |
| Power Supply Rejection Ratio (PSRR) | 73dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 6μA |
| Input Bias Current | 6μA |
| Current - Quiescent (Max) | 10mA 4mA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 6μA @ 5V |
| CMRR, PSRR (Typ) | 85dB CMRR, 73dB PSRR |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8611ARZ-REEL Overview
For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .Output type Complementary, TTL is used for this comparator.The part will be shipped by Tape & Reel (TR) .As you can see, the comparator has8 terminals.The component belongs to the Comparator family of electrical components.When supplied with 3V voltage, the comparator is capable of performing a wide range of tasks.Speaking of types, this is a typical with Latch comparator.The device contains 8 pins.Electronic comparator is recommended to mount using type Surface Mount .As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.The comparator has a pin count of 8 .Alternatively, you may search for AD8611 to find more pin-to-pin solutions for your specific needs.There is 4mA current flowing in this comparator.Electronic comparator is recommended that the nominal supply current for the device be set to 10mA .Electronic comparator is sufficient to run the device wElectronic comparatorh 3/5V power supplies.Electronic comparator is possible to input up to 6μA current into the device.The voltage formula shows that the part has a voltage gain of 69.54dB .
AD8611ARZ-REEL Features
Complementary, TTL output capability
with Latch IC
Operates under -40°C~85°C
Quiescent Current: 4mA
Voltage Gain: 69.54dB
AD8611ARZ-REEL Applications
There are a lot of Analog Devices Inc. AD8611ARZ-REEL linear comparators applications.
- Multivibrators and High-Voltage Digital Logic Gates
- Pulse, Squarewave, and Time Delay Generators
- Notebooks and PDAs
- Set Top Boxes
- Window Comparators
- Consumer Medical Electronics
- System control and monitoring
- Security Detection Systems
- Lithium ion battery monitoring
- Hand-Held Electronics
