AD8612ARU
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 100mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8612 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | Complementary, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 10mA |
| Power Dissipation | 100mW |
| Propagation Delay | 5.5 ns |
| Quiescent Current | 4mA |
| Turn On Delay Time | 5.5 ns |
| Response Time | 4.5 ns |
| Common Mode Rejection Ratio | 85 dB |
| Voltage - Supply, Single/Dual (±) | 3V~5V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 70dB |
| Average Bias Current-Max (IIB) | 4μA |
| Power Supply Rejection Ratio (PSRR) | 73dB |
| Supply Voltage Limit-Max | 7V |
| Input Bias Current | 6μA |
| Current - Quiescent (Max) | 10mA 4mA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 6μA @ 5V |
| CMRR, PSRR (Typ) | 85dB CMRR, 73dB PSRR |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD8612ARU Overview
The product is packaged in 14-TSSOP (0.173, 4.40mm Width) to facilitate transportation.Output type Complementary, TTL is used for this comparator.The part is shipped by Tube .The comparator has 14 terminals.Electronic comparator is a component of the Comparator family.With a voltage of 3V supplied, the comparator is capable of performing a wide range of demanding tasks.It's a typical with Latch comparator.A total of 2 elements can be found in it.A total of 14 pins are included.Surface Mount universial mout for easy adapting.As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.14 pins are available on the comparator.You can find more pin-to-pin solutions for your special requirements by searching AD8612 .A quiescent current of 4mA is observed in this comparator.Normally, the nominal supply current should be 10mA .Electronic comparator is sufficient to run the device wElectronic comparatorh 3/5V power supplies.According to the voltage formula, the part has a voltage gain of 70dB .
AD8612ARU Features
Complementary, TTL output capability
with Latch IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 4mA
Voltage Gain: 70dB
AD8612ARU Applications
There are a lot of Analog Devices Inc. AD8612ARU linear comparators applications.
- Mobile Phones
- Window Comparators, Multivibrators
- Metering Systems
- Mobile Phones and Tablets
- Automatic Test Equipment
- Handheld Instruments
- High-Speed Sampling Circuits
- Consumer Medical Electronics
- Zero-Crossing Detectors
- Multivibrators and High-Voltage Digital Logic Gates
