AD8612ARUZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 100mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8612 |
| Pin Count | 14 |
| Output Type | Complementary, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 10mA |
| Power Dissipation | 100mW |
| Max Supply Current | 10mA |
| Propagation Delay | 5.5 ns |
| Quiescent Current | 4mA |
| Turn On Delay Time | 5.5 ns |
| Response Time | 4.5 ns |
| Common Mode Rejection Ratio | 85 dB |
| Voltage - Supply, Single/Dual (±) | 3V~5V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 69.54dB |
| Average Bias Current-Max (IIB) | 4μA |
| Power Supply Rejection Ratio (PSRR) | 73dB |
| Supply Voltage Limit-Max | 7V |
| Input Bias Current | 6μA |
| Current - Quiescent (Max) | 10mA 4mA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 6μA @ 5V |
| CMRR, PSRR (Typ) | 85dB CMRR, 73dB PSRR |
| Height | 1mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8612ARUZ Overview
A convenient transport package is provided in 14-TSSOP (0.173, 4.40mm Width) .Output type of this comparator is Complementary, TTL .As a result, it is designed with Tube package.The device is designed with 14 terminations.Electronic comparator is a component of the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 3V voltage.This is a typical comparator of type with Latch .A total of 2 elements can be found in it.There are 14 pins on this board.The type of mounting recommended is Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.14 pins are present on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search AD8612 .In this comparator, the quiescent current is 4mA .Electronic comparator is recommended that the nominal supply current for the device be set to 10mA .A supply current exceeding 10mA may result in the comparator malfunctioning.In order to operate the device, 3/5V power supplies are sufficient.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 69.54dB .
AD8612ARUZ Features
Complementary, TTL output capability
with Latch IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 4mA
Voltage Gain: 69.54dB
AD8612ARUZ Applications
There are a lot of Analog Devices Inc. AD8612ARUZ linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Industrial
- Wide Range VCO; MOS Clock Timers
- General Purpose Low Voltage Applications
- Body Control Modules
- Lithium ion battery monitoring
- General-Purpose Portable Devices
- Power Supervision
- Point of load regulators
- Mobile Phones
