AD8612ARUZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 100mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8612 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | Complementary, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 10mA |
| Power Dissipation | 100mW |
| Propagation Delay | 5.5 ns |
| Quiescent Current | 4mA |
| Turn On Delay Time | 5.5 ns |
| Response Time | 4.5 ns |
| Common Mode Rejection Ratio | 85 dB |
| Voltage - Supply, Single/Dual (±) | 3V~5V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 70dB |
| Average Bias Current-Max (IIB) | 4μA |
| Power Supply Rejection Ratio (PSRR) | 73dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 6μA |
| Input Bias Current | 6μA |
| Current - Quiescent (Max) | 10mA 4mA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 6μA @ 5V |
| CMRR, PSRR (Typ) | 85dB CMRR, 73dB PSRR |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8612ARUZ-REEL Overview
Electronic comparator is packaged in 14-TSSOP (0.173, 4.40mm Width) for convenient transportation.A comparator with a Complementary, TTL output is used here.The part is shipped by Tape & Reel (TR) .14 terminals are found on the comparator.The component belongs to the Comparator family of electrical components.With a voltage of 3V supplied, the comparator is capable of performing a wide range of demanding tasks.It's a typical with Latch comparator.The total number of elements is 2 .A total of 14 pins are included.Electronic comparator is recommended that the mounting type be Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .14 pins are available on the comparator.Alternatively, you may search for AD8612 to find more pin-to-pin solutions for your specific needs.The comparator displays a quiescent current of 4mA .Normal use of the device should require a nominal supply current of 10mA .In order to run the device, there are only 3/5V power supplies required.Electronic comparator is possible to input a maximum of 6μA current into the device.A voltage gain of 70dB can be determined from the voltage formula for the part.
AD8612ARUZ-REEL Features
Complementary, TTL output capability
with Latch IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 4mA
Voltage Gain: 70dB
AD8612ARUZ-REEL Applications
There are a lot of Analog Devices Inc. AD8612ARUZ-REEL linear comparators applications.
- Battery-Powered Electronics
- Wearable Devices
- Analog front end
- Notebooks and PDAs
- Portable Battery Monitoring
- General-Purpose Portable Devices
- Wide Range VCO; MOS Clock Timers
- Battery-Powered Electronics
- Window Comparators, Multivibrators
- Security Detection Systems
