AD8613AKSZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8613 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Channels | 1 |
| Operating Supply Current | 38μA |
| Quiescent Current | 38μA |
| Slew Rate | 0.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5V ±0.9V~2.5V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 2.2mV |
| Gain Bandwidth Product | 400kHz |
| Unity Gain BW-Nom | 350 kHz |
| Voltage Gain | 113.98dB |
| Average Bias Current-Max (IIB) | 0.00078μA |
| Power Supply Rejection Ratio (PSRR) | 94dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 400μV |
| Settling Time | 23 μs |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Input Capacitance | 2.5pF |
| Wideband | NO |
| Input Voltage Noise Density | 25nV/sqrt Hz |
| Length | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8613AKSZ-REEL Overview
Op amp is packaged in 5-TSSOP, SC-70-5, SOT-353 case. There are two types of operational amplifiers in this circuit. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations is approaching the 5 mark. The total number of pins on linear amplifier is 5. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. This particular linear amplifier is a type of Operational Amplifier device, to be precise. It has 5 pins that make up the linear amplifier. Op amp ic rates 2.2mV for input offset voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, op amp ranges -40°C~125°C. As long as the supply current of the chip does not exceed 38μA, this op amp ic can operate. Keeping the voltage gain at 113.98dB is the best course of action. The op amp ic has 1 channels on it. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The operating supply voltage of instrumentation amplifier is rated 3V voltage. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method. Currently, linear amplifier is operating with a quiescent current of 38μA.
AD8613AKSZ-REEL Features
5 Pins
supply voltage of 5V
113.98dB voltage gain
Output Type: Rail-to-Rail
AD8613AKSZ-REEL Applications
There are a lot of Analog Devices Inc. AD8613AKSZ-REEL Instrumentational OP Amps applications.
- RF cable systems
- Video computer boards
- Signal transformation
- Commercial audio systems
- Home audio systems
- Active probe
- Differentiator circuits
- High speed sample
- Logarithmic operation circuits
- Computer workstations
