AD8615AUJZ-R2
| Parameters | |
|---|---|
| Output Current per Channel | 150mA |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 24MHz |
| Unity Gain BW-Nom | 23000 kHz |
| Voltage Gain | 123.52dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 23μV |
| Settling Time | 300 ns |
| Low-Bias | YES |
| Max Frequency | 100kHz |
| Input Capacitance | 6.7pF |
| Input Voltage Noise Density | 10nV/sqrt Hz |
| Height | 900μm |
| Length | 2.9mm |
| Width | 1.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | DigiTrim® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8615 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Channels | 1 |
| Operating Supply Current | 1.7mA |
| Quiescent Current | 1.7mA |
| Slew Rate | 12V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
AD8615AUJZ-R2 Overview
In the package, you will find a SOT-23-5 Thin, TSOT-23-5-case to contain the op amp ic. There are two types of operational amplifiers in this circuit. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. We are approaching the 5h termination of the year. The total number of pins on linear amplifier is 5. This linear amplifier should be powered by an 2.7V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. A total of 5 pins are present on the instrumentation amplifier. The input offset voltage is 100μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. In order for this instrumentation amplifier to operate, the supply current needs to be between 1.7mA and 10 . 123.52dB should be the voltage gain. Buffer op amp is equipped with 1 channels on the device. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 3V. The linear amplifier is packaged by using a TR axis. Instrumentation amplifiers are numbered by their DigiTrim? series. There is an 1.7mA quiescent current running through op amp ic.
AD8615AUJZ-R2 Features
5 Pins
supply voltage of 2.7V
123.52dB voltage gain
Output Type: Rail-to-Rail
AD8615AUJZ-R2 Applications
There are a lot of Analog Devices Inc. AD8615AUJZ-R2 Instrumentational OP Amps applications.
- Professional videography
- Biopotential
- Industrial applications including automation
- E-book readers
- Voltage regulation circuit
- Automatic control
- Image computer boards
- Power control
- Video amplifiers
- Medical imaging
