AD8616ARMZ

2 Channels 150mA per Channel 0.2pA 100 dB Instrumentational OP Amps 0.00055μA 3V 2.7V~5.5V ±1.35V~2.75V AD8616 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-AD8616ARMZ
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 842
Description: 2 Channels 150mA per Channel 0.2pA 100 dB Instrumentational OP Amps 0.00055μA 3V 2.7V~5.5V ±1.35V~2.75V AD8616 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
Series	DigiTrim®
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.7V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	AD8616
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	3V
Number of Channels	2
Operating Supply Current	4mA
Quiescent Current	2mA
Supply Current-Max	5mA
Slew Rate	12V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	100 dB
Current - Input Bias	0.2pA
Voltage - Supply, Single/Dual (±)	2.7V~5.5V ±1.35V~2.75V
Output Current per Channel	150mA
Input Offset Voltage (Vos)	60μV
Bandwidth	24MHz
Unity Gain BW-Nom	23000 kHz
Voltage Gain	123.52dB
Average Bias Current-Max (IIB)	0.00055μA
Power Supply Rejection Ratio (PSRR)	90dB
Low-Offset	YES
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Voltage - Input Offset	23μV
Settling Time	500 ns
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.000001μA
Programmable Power	NO
Input Capacitance	10pF
Input Voltage Noise Density	10nV/sqrt Hz
Height	850μm
Length	3mm
Width	3mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

AD8616ARMZ Overview

Op amp is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. General Purpose-type instrumentation amplifiers are used in this application. A Tube case is used to deliver the buffer op amp. It is estimated that there will be 8 terminations in the next few months. Linear amplifier has a total of 8 pins. Please take in mind that op amp should be run at 2.7V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. In total, the buffer amplifier consists of 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 60μV. This electronic part is recommended for mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. An 4mA volt supply current is needed for this linear amplifier to operate. 123.52dB should be the voltage gain. There are 2 channels on the operational amplifiers. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 3V voltage. DigiTrim? corresponds to the op amp's series. Currently, linear amplifier is operating with a quiescent current of 2mA.