AD8617WARZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8617 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Channels | 2 |
| Operating Supply Current | 76μA |
| Quiescent Current | 38μA |
| Supply Current-Max | 0.1mA |
| Slew Rate | 0.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5V ±0.9V~2.5V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 2.2mV |
| Gain Bandwidth Product | 400kHz |
| Unity Gain BW-Nom | 350 kHz |
| Voltage Gain | 113.98dB |
| Power Supply Rejection Ratio (PSRR) | 94dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 400μV |
| Settling Time | 23 μs |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000001μA |
| Screening Level | AEC-Q100 |
| Input Capacitance | 2.5pF |
| Input Voltage Noise Density | 25nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8617WARZ-R7 Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. This is a General Purpose type op amp. A Tape & Reel (TR) case is used for delivering the op amp. We are approaching the 8h termination of the year. A total of 8 pins are attached to buffer op amp. Please take in mind that this instrumentation amplifier should be run at 5V. Instrumentation amplifier is a part of Operational Amplifier. The buffer op amp includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 2.2mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . Using an 76μA supply current, this operational amplifier ics can be operated. 113.98dB should be the voltage gain. 2 channels are available on the instrumentation amplifier. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The operating supply voltage of the buffer op amp is rated at 3V. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. In this case, Automotive represents the instrumentation amplifiers' series number. As a result, linear amplifier's quiescent current is 38μA.
AD8617WARZ-R7 Features
8 Pins
supply voltage of 5V
113.98dB voltage gain
Output Type: Rail-to-Rail
AD8617WARZ-R7 Applications
There are a lot of Analog Devices Inc. AD8617WARZ-R7 Instrumentational OP Amps applications.
- Blood pressure sensors
- Navigation
- Image computer boards
- Video data acquisition
- Inverse/same-phase proportional circuit
- Portable docking station
- Car stereo
- Band-pass filter
- Semiconductor detectors
- Fast A/D and D/A converters
