AD8618ARUZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | DigiTrim® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8618 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Power Supplies | 2.7/5V |
| Number of Channels | 4 |
| Operating Supply Current | 8mA |
| Max Supply Current | 8mA |
| Quiescent Current | 2mA |
| Slew Rate | 12V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Output Current per Channel | 150mA |
| Input Offset Voltage (Vos) | 60μV |
| Bandwidth | 20MHz |
| Gain Bandwidth Product | 24MHz |
| Unity Gain BW-Nom | 23000 kHz |
| Voltage Gain | 123.52dB |
| Average Bias Current-Max (IIB) | 0.00055μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 23μV |
| Settling Time | 500 ns |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.000001μA |
| Input Capacitance | 10pF |
| Input Voltage Noise Density | 10nV/sqrt Hz |
| Height | 1mm |
| Length | 5mm |
| Width | 4.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8618ARUZ Overview
In order to protect the op amps, a 14-TSSOP (0.173, 4.40mm Width) case is used. This is a General Purpose type op amp. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. There have been a total of 14 terminations over the past year. A total of 14 pins are attached to buffer op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 2.7V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The buffer op amp includes 14 pins. There is an input offset voltage of 60μV for this buffer op amp. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . It is possible to operate this buffer amplifier from a supply current of 8mA . The voltage gain should stay at 123.52dB. As far as the device is concerned, buffer amplifier has 4 channels. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 3V. In this case, DigiTrim? represents the instrumentation amplifiers' series number. Buffer amplifier has a quiescent current of 2mA.
AD8618ARUZ Features
14 Pins
supply voltage of 2.7V
123.52dB voltage gain
Output Type: Rail-to-Rail
AD8618ARUZ Applications
There are a lot of Analog Devices Inc. AD8618ARUZ Instrumentational OP Amps applications.
- Polarized electrodes
- High/low-pass filter circuit
- Test equipment
- Inverse/same-phase proportional circuit
- Signal transformation
- Measurements of Wheatstone bridge
- Precision measurement
- Power generator
- Weighing systems
- Comparator
