AD8619ARUZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Supplier Device Package | 14-TSSOP |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | AD8619 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Elements | 4 |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Max Supply Voltage | 5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 152μA |
| Quiescent Current | 38μA |
| Current - Supply | 38μA |
| Slew Rate | 0.1V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5V ±0.9V~2.5V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 2.2mV |
| Gain Bandwidth Product | 400kHz |
| Voltage Gain | 113.98dB |
| Power Supply Rejection Ratio (PSRR) | 94dB |
| Voltage - Input Offset | 400μV |
| Settling Time | 23 μs |
| Current - Output / Channel | 80mA |
| Max Dual Supply Voltage | 2.5V |
| Min Dual Supply Voltage | 900mV |
| Input Capacitance | 2.5pF |
| Input Voltage Noise Density | 25nV/sqrt Hz |
| Number of Amplifiers | 4 |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8619ARUZ-REEL Overview
There is a 14-TSSOP (0.173, 4.40mm Width) case in which the instrumentation amplifier is packaged. A General Purpose-type buffer amplifier is shown here. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In total, the buffer amplifier consists of 14 pins. Op amp rates 2.2mV as input offset voltage. This electrical part should be mounted using type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . Using a supply current of 152μA , this buffer op amp will be able to operate. You should keep the voltage gain at 113.98dB for the time being. On this instrumentation amplifier, there are 4 circuits that are connected together. The op amp ic has 4 channels on it. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. For this linear amplifier to work, the temperature should not be below -40°C. A temperature greater than 125°C should not be used for the operation of this instrumentation amplifier. Op amp has total of 4 elements. The operating supply voltage of the buffer op amp is rated at 3V. A supply of 38μA or higher is recommended for use with this electronic part. It is important to keep in mind that the power supply voltage of this electric component is below 5V, which is suitable. As a general rule, it is advisable to keep the op amp's supply voltage above 1.8V at all times. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 2.5V volts. There is an 38μA quiescent current in linear amplifier. The linear amplifier has 4 amplifiers.
AD8619ARUZ-REEL Features
113.98dB voltage gain
Output Type: Rail-to-Rail
AD8619ARUZ-REEL Applications
There are a lot of Analog Devices Inc. AD8619ARUZ-REEL Instrumentational OP Amps applications.
- High-frequency data acquisition systems
- Large motor controllers
- Logarithmic operation circuits
- Thermocouples
- High gain DC amplifier
- Switching amplifier
- Car stereo
- Ultrasound transducers
- RF cable systems
- Proportional counter tubes
