AD8619ARZ
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8619 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Power Supplies | +-0.9/+-2.5/1.8/5V |
| Number of Channels | 4 |
| Operating Supply Current | 152μA |
| Quiescent Current | 38μA |
| Supply Current-Max | 0.2mA |
| Slew Rate | 0.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5V ±0.9V~2.5V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 2.2mV |
| Bandwidth | 400 kHz |
| Unity Gain BW-Nom | 350 kHz |
| Voltage Gain | 113.98dB |
| Average Bias Current-Max (IIB) | 0.00078μA |
| Power Supply Rejection Ratio (PSRR) | 94dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 400μV |
| Settling Time | 23 μs |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000001μA |
| Input Capacitance | 2.5pF |
| Input Voltage Noise Density | 25nV/sqrt Hz |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
AD8619ARZ Overview
Packaged in a 14-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. The instrumentation amplifier in this picture is of the General Purpose-type. Instrumentation amplifier is delivered in a Tube case. A total of 14 terminations have been reported in the past few weeks. Linear amplifier has a total of 14 pins. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. Instrumentation amplifier is a part of Operational Amplifier. A total of 14 pins are present on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 2.2mV. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, op amp ranges -40°C~125°C. Operational amplifier can operate supply current at 152μA. 113.98dB should remain the voltage gain. On the buffer amps, there are 4 channels that can be used. On the output type, there are Rail-to-Rail different types of op amps. The operating supply voltage of the buffer op amp is rated at 3V. Buffer amplifier has a quiescent current of 38μA.
AD8619ARZ Features
14 Pins
supply voltage of 5V
113.98dB voltage gain
Output Type: Rail-to-Rail
AD8619ARZ Applications
There are a lot of Analog Devices Inc. AD8619ARZ Instrumentational OP Amps applications.
- Non-polarized electrodes
- Addition operation circuits
- Medical instruments
- Gaming industry
- MP3
- Automatic control
- Thermocouples
- PDA
- Video computer boards
- Exponential operation circuits
