AD8620AR
| Parameters | |
|---|---|
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8620 |
| Pin Count | 8 |
| Power Supplies | +-5/+-13V |
| Number of Channels | 2 |
| Operating Supply Current | 7mA |
| Max Supply Current | 6mA |
| Quiescent Current | 3.5mA |
| Slew Rate | 60V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 3pA |
| Voltage - Supply, Single/Dual (±) | ±5V~13V |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 150μV |
| Gain Bandwidth Product | 25MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 25000 kHz |
| Voltage Gain | 105.11dB |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 13.65V |
| Voltage - Input Offset | 85μV |
| Settling Time | 600 ns |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.00001μA |
| Dual Supply Voltage | 9V |
| Input Capacitance | 15pF |
| Neg Supply Voltage-Max (Vsup) | -13.65V |
| Input Offset Current-Max (IIO) | 0.00015μA |
| Input Voltage Noise Density | 6nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
AD8620AR Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Op amps are J-FET types of amplifier on the chip. The op amp is delivered to you in a Tube case. During the past two weeks, there have been close to 8 terminations. The total number of pins on linear amplifier is 8. Please take in mind that this instrumentation amplifier should be run at 5V. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are available on the instrumentation amplifier. Op amp rates 150μV as input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. It is possible to operate this buffer amplifier from a supply current of 7mA . Voltage gain should remain at 105.11dB. There are 2 channels on the operational amplifiers. Currently, linear amplifier is operating with a quiescent current of 3.5mA.
AD8620AR Features
8 Pins
supply voltage of 5V
105.11dB voltage gain
AD8620AR Applications
There are a lot of Analog Devices Inc. AD8620AR Instrumentational OP Amps applications.
- Addition operation circuits
- Multimedia playback equipment
- Proportional operation circuits
- Signal filtering
- Communication device
- single/dual op amp sum and difference circuits
- Mobile phone
- Logarithmic operation circuits
- Automotive sensors
- High gain DC amplifier
