AD8620ARZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8620 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | +-5/+-13V |
| Number of Channels | 2 |
| Operating Supply Current | 7mA |
| Quiescent Current | 3.5mA |
| Slew Rate | 60V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 3pA |
| Voltage - Supply, Single/Dual (±) | ±5V~13V |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 150μV |
| Gain Bandwidth Product | 25MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 25000 kHz |
| Voltage Gain | 105.11dB |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 13.65V |
| Voltage - Input Offset | 85μV |
| Settling Time | 600 ns |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.00001μA |
| Input Capacitance | 15pF |
| Neg Supply Voltage-Max (Vsup) | -13.65V |
| Input Offset Current-Max (IIO) | 0.00015μA |
| Input Voltage Noise Density | 6nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8620ARZ-REEL Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the J-FET-type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. The number of terminations is approaching the 8 mark. It consists of a total of 8 pins in total. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. It should be noted that this op amp is a type of Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 150μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 7mA and 10 . Keeping the voltage gain at 105.11dB is the best course of action. There are 2 channels on the operational amplifiers. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. There is an 3.5mA quiescent current running through op amp ic.
AD8620ARZ-REEL Features
8 Pins
supply voltage of 5V
105.11dB voltage gain
AD8620ARZ-REEL Applications
There are a lot of Analog Devices Inc. AD8620ARZ-REEL Instrumentational OP Amps applications.
- Automotive sensors
- Exponential operation circuits
- Biopotential
- Fission chambers
- Oscilloscopes
- Radiation thermometry transducers
- Scintillation detectors
- Broadcasting
- Digital cameras
- Proportional counter tubes
