AD8620ARZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8620 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | +-5/+-13V |
| Number of Channels | 2 |
| Operating Supply Current | 7mA |
| Quiescent Current | 3.5mA |
| Slew Rate | 60V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 3pA |
| Voltage - Supply, Single/Dual (±) | ±5V~13V |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 150μV |
| Gain Bandwidth Product | 25MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 25000 kHz |
| Voltage Gain | 105.11dB |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 13.65V |
| Voltage - Input Offset | 85μV |
| Settling Time | 600 ns |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.00001μA |
| Input Capacitance | 15pF |
| Neg Supply Voltage-Max (Vsup) | -13.65V |
| Input Offset Current-Max (IIO) | 0.00015μA |
| Input Voltage Noise Density | 6nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8620ARZ-REEL7 Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. There are two types of operational amplifiers in this circuit. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. Linear amplifier includes 8 pins. In terms of input offset voltage, operational amplifier rates 150μV. This electrical part should be mounted using type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . As long as the supply current of the chip does not exceed 7mA, this op amp ic can operate. There should be no change in the voltage gain. 2 channels are available on the instrumentation amplifier. TAPE AND REEL is adopted to pack the instrumentation amplifier. Currently, linear amplifier is operating with a quiescent current of 3.5mA.
AD8620ARZ-REEL7 Features
8 Pins
supply voltage of 5V
105.11dB voltage gain
AD8620ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8620ARZ-REEL7 Instrumentational OP Amps applications.
- Information processing
- Radiation thermometry transducers
- Integrator circuits
- Proportional counter tubes
- Portable electronic products powered by batteries
- Medical imaging
- Test equipment
- Automotive sensors
- Measurements of Wheatstone bridge
- Video amplifiers
