AD8622ARMZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 139.989945mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8622 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 430μA |
| Quiescent Current | 215μA |
| Supply Current-Max | 0.7mA |
| Slew Rate | 0.48V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 135 dB |
| Current - Input Bias | 45pA |
| Voltage - Supply, Single/Dual (±) | ±2.5V~15V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 125μV |
| Gain Bandwidth Product | 560kHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Unity Gain BW-Nom | 580 kHz |
| Voltage Gain | 137dB |
| Average Bias Current-Max (IIB) | 0.0004μA |
| Power Supply Rejection Ratio (PSRR) | 145dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 10μV |
| Low-Bias | YES |
| Micropower | YES |
| Input Capacitance | 3pF |
| Input Voltage Noise Density | 11nV/sqrt Hz |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8622ARMZ-R7 Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case package that contains the instrumentation amplifiers. This is a Voltage Feedback type op amp. The op amp is delivered to you in a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. It consists of a total of 8 pins in total. Please take in mind that this instrumentation amplifier should be run at 2.5V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. A total of 8 pins are present on the instrumentation amplifier. Op amp rates 125μV as input offset voltage. This electrical part should be mounted using type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureAn 430μA volt supply current is needed for this linear amplifier to operate. It is a member of the 137dB's 137dB family. The op amp ic has 2 channels on it. On the output type, there are Rail-to-Rail different types of op amps. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. Currently, linear amplifier is operating with a quiescent current of 215μA.
AD8622ARMZ-R7 Features
8 Pins
supply voltage of 2.5V
137dB voltage gain
Output Type: Rail-to-Rail
AD8622ARMZ-R7 Applications
There are a lot of Analog Devices Inc. AD8622ARMZ-R7 Instrumentational OP Amps applications.
- Power transmission
- Proportional counter tubes
- RF cable systems
- Home audio systems
- Power generator
- Industrial control system
- Active probe
- Measurements of Wheatstone bridge
- Industrial applications including automation
- Portable media players
