AD8622ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8622 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 430μA |
| Quiescent Current | 215μA |
| Supply Current-Max | 0.7mA |
| Slew Rate | 0.48V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 135 dB |
| Current - Input Bias | 45pA |
| Voltage - Supply, Single/Dual (±) | ±2.5V~15V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 125μV |
| Bandwidth | 600 kHz |
| Gain Bandwidth Product | 560kHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Unity Gain BW-Nom | 580 kHz |
| Voltage Gain | 137dB |
| Average Bias Current-Max (IIB) | 0.0004μA |
| Power Supply Rejection Ratio (PSRR) | 145dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 10μV |
| Low-Bias | YES |
| Micropower | YES |
| Input Capacitance | 3pF |
| Input Voltage Noise Density | 11nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8622ARZ Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. Voltage Feedback-type instrumentation amplifiers are used in this application. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. During the past two weeks, there have been close to 8 terminations. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 2.5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. Linear amplifier includes 8 pins. Op amp rates 125μV as input offset voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 430μA and 10 . There should be no change in the voltage gain at 137dB. 2 channels are available on the instrumentation amplifier. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The quiescent current is 215μA.
AD8622ARZ Features
8 Pins
supply voltage of 2.5V
137dB voltage gain
Output Type: Rail-to-Rail
AD8622ARZ Applications
There are a lot of Analog Devices Inc. AD8622ARZ Instrumentational OP Amps applications.
- Oscilloscopes
- Non-polarized electrodes
- Polarized electrodes
- Gaming industry
- High-frequency data acquisition systems
- Band-pass filter
- Exponential operation circuits
- Industrial control system
- Subtraction operation circuits
- Video data acquisition
