AD8624ACPZ-R2
| Parameters | |
|---|---|
| Unity Gain BW-Nom | 600 kHz |
| Voltage Gain | 137dB |
| Average Bias Current-Max (IIB) | 0.0005μA |
| Power Supply Rejection Ratio (PSRR) | 145dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 10μV |
| Low-Bias | YES |
| Micropower | YES |
| Max Frequency | 1kHz |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Input Capacitance | 3pF |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Height | 750μm |
| Length | 4.1mm |
| Width | 4.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8624 |
| Pin Count | 16 |
| Output Type | Rail-to-Rail |
| Power Supplies | +-2.5/+-15V |
| Number of Channels | 4 |
| Operating Supply Current | 860μA |
| Quiescent Current | 215μA |
| Slew Rate | 0.48V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 135 dB |
| Current - Input Bias | 45pA |
| Voltage - Supply, Single/Dual (±) | ±2.5V~15V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 125μV |
| Bandwidth | 560 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
AD8624ACPZ-R2 Overview
The linear amplifier is packaged in a 16-WQFN Exposed Pad, CSP case which makes it easy for the consumer to handle. Op amps are Voltage Feedback types of amplifier on the chip. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. It is estimated that there will be at least 16 terminations this year. A total of 16 pins are located on this board. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. To be specific, this instrumentation amplifier is a type of Operational Amplifier. A total of 16 pins are present on the instrumentation amplifier. Regarding input offset voltage, op amp rates 125μV. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . Using a supply current of 860μA , this buffer op amp will be able to operate. It is recommended to keep the voltage gain at 137dB at all times. There are 4 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. An buffer amplifier is packed in a TR-shape according to the design. There is an 215μA quiescent current running through op amp ic.
AD8624ACPZ-R2 Features
16 Pins
supply voltage of 15V
137dB voltage gain
Output Type: Rail-to-Rail
AD8624ACPZ-R2 Applications
There are a lot of Analog Devices Inc. AD8624ACPZ-R2 Instrumentational OP Amps applications.
- Active probe
- Voltage regulation circuit
- Signal amplification
- Portable docking station
- Power generator
- Automatic control
- Exponential operation circuits
- Communication device
- Cinema or auditorium audio system
- Commercial audio systems
