AD8624ACPZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8624 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-2.5/+-15V |
| Number of Channels | 4 |
| Operating Supply Current | 860μA |
| Quiescent Current | 215μA |
| Slew Rate | 0.48V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 135 dB |
| Current - Input Bias | 45pA |
| Voltage - Supply, Single/Dual (±) | ±2.5V~15V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 125μV |
| Gain Bandwidth Product | 560kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 600 kHz |
| Voltage Gain | 137dB |
| Average Bias Current-Max (IIB) | 0.0005μA |
| Power Supply Rejection Ratio (PSRR) | 145dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 10μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Input Capacitance | 3pF |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Height Seated (Max) | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8624ACPZ-R7 Overview
In order to protect the op amps, a 16-WQFN Exposed Pad, CSP case is used. There are two types of operational amplifiers in this circuit. Linear amplifier is delivered in a Tape & Reel (TR) case. During the past two weeks, there have been close to 16 terminations. A total of 16 pins are attached to buffer op amp. This linear amplifier should be powered by an 15V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. A total of 16 pins are present on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 125μV. This electrical part should be mounted using type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. Using an 860μA supply current, this operational amplifier ics can be operated. Op amp is a member of the 137dB's 137dB family. The op amp ic has 4 channels on it. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. TAPE AND REEL is adopted to pack the instrumentation amplifier. Currently, linear amplifier is operating with a quiescent current of 215μA.
AD8624ACPZ-R7 Features
16 Pins
supply voltage of 15V
137dB voltage gain
Output Type: Rail-to-Rail
AD8624ACPZ-R7 Applications
There are a lot of Analog Devices Inc. AD8624ACPZ-R7 Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Biopotential
- Large motor controllers
- Strain gauges
- Weighing systems
- Blood pressure sensors
- High speed sample
- Commercial audio systems
- Medical imaging
- MP3
