AD8624ARUZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 140.30179mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8624 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-2.5/+-15V |
| Number of Channels | 4 |
| Operating Supply Current | 860μA |
| Quiescent Current | 215μA |
| Slew Rate | 0.48V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 135 dB |
| Current - Input Bias | 45pA |
| Voltage - Supply, Single/Dual (±) | ±2.5V~15V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 125μV |
| Gain Bandwidth Product | 560kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 600 kHz |
| Voltage Gain | 137dB |
| Average Bias Current-Max (IIB) | 0.0005μA |
| Power Supply Rejection Ratio (PSRR) | 145dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 10μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Input Capacitance | 3pF |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8624ARUZ-RL Overview
A 14-TSSOP (0.173, 4.40mm Width) case is used to package the op amp. The instrumentation amplifier in this picture is of the Voltage Feedback-type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be at least 14 terminations this year. It consists of a total of 14 pins in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. There are 14 pins on this chip. Op amp ic rates 125μV for input offset voltage. This electrical part should be mounted using type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Using a supply current of 860μA , this buffer op amp will be able to operate. Keeping the voltage gain at 137dB is the best course of action. As far as the device is concerned, buffer amplifier has 4 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method. Linear amplifier has a quiescent current of 215μA.
AD8624ARUZ-RL Features
14 Pins
supply voltage of 15V
137dB voltage gain
Output Type: Rail-to-Rail
AD8624ARUZ-RL Applications
There are a lot of Analog Devices Inc. AD8624ARUZ-RL Instrumentational OP Amps applications.
- High/low-pass filter circuit
- Medical imaging
- Communication device
- Home audio systems
- Signal transformation
- Mobile phone
- Communication
- Radar
- Precision measurement
- Integrator circuits
