AD8627AKSZ-R2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8627 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 850μA |
| Max Supply Current | 785μA |
| Quiescent Current | 850μA |
| Slew Rate | 5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 87 dB |
| Current - Input Bias | 0.25pA |
| Voltage - Supply, Single/Dual (±) | 5V~26V ±2.5V~13V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 750μV |
| Bandwidth | 5MHz |
| Neg Supply Voltage-Nom (Vsup) | -13V |
| Unity Gain BW-Nom | 5000 kHz |
| Voltage Gain | 107.23dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Power Supply Rejection Ratio (PSRR) | 104dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 350μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Input Voltage Noise Density | 17.5nV/sqrt Hz |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AD8627AKSZ-R2 Overview
A 5-TSSOP, SC-70-5, SOT-353 case is used to package the op amp. Buffer amps of this type are called J-FET-types. Linear amplifier is delivered in a Tape & Reel (TR) case. There have been a total of 5 terminations over the past year. The total number of pins on linear amplifier is 5. Please take in mind that op amp should be run at 13V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. In total, the buffer amplifier consists of 5 pins. The input offset voltage is 750μV. This electronic part is recommended for mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . As long as the supply current of the chip does not exceed 850μA, this op amp ic can operate. Voltage gain should remain at 107.23dB. Op amp ic has 1 channels. On the output type, there are Rail-to-Rail different types of op amps. The linear amplifier is packaged by using a TAPE AND REEL axis. There is an 850μA quiescent current running through op amp ic.
AD8627AKSZ-R2 Features
5 Pins
supply voltage of 13V
107.23dB voltage gain
Output Type: Rail-to-Rail
AD8627AKSZ-R2 Applications
There are a lot of Analog Devices Inc. AD8627AKSZ-R2 Instrumentational OP Amps applications.
- Wireless base stations
- Radiation thermometry transducers
- Communication device
- Information processing
- Television
- Multiplication circuits
- Professional videography
- Computer workstations
- Radar
- Video conversion and routing
